https://www.AutomationDirect.com/io-link - (VID-CM-0072)
- The standard architecture of an IO-Link system consists of an IO-Link master and at least one IO-Link device. The system can also support standard field I/O devices to transmit basic sensing/control data to/from a host controller.
An IO-Link hub can be used to aggregate digital sensor and actuator signals to be transmitted back to an IO-Link master via a single standard cable, providing an economical solution for field I/O data transmission. These hubs do not support IO-Link diagnostic information data; however, the IO-Link master module does monitor each channel for current and voltage anomalies.
IO-Link hubs feature:
8 digital IO ports (8 or 16 inputs/outputs)
M8 or M12 signal connections, depending on model
Up to 2A per output (within power limits of IO-Link master)
Extended channel diagnostics
Realtime power data monitoring
Simple installation using A-coded M12 cordset
Fully-potted, machine-mountable plastic housings - no enclosure required
IP68 rating
Easily integrate IO-Link master modules, hubs, and their connected sensors/actuators with Productivity PLCs using task libraries available in the Productivity Suite programming software
To learn more visit https://www.automationdirect.com/io-link
Check out all of our videos at https://www.AutomationDirect.com/Videos
To subscribe: https://www.youtube.com/user/automationdirect?sub_confirmation=1
Community Solution Center: https://community.automationdirect.com/s/
Facebook: https://www.facebook.com/AutomationDirect
Twitter: https://twitter.com/AutomationDirec
LinkedIn: https://www.linkedin.com/company/automationdirect
**Prices were valid at the time the video was released and are subject to change.
Related AutomationDirect.com part numbers: 59507, 59710, 59719