Making a wooden maze game project on the CNC machine for my daughter using Amana Tool® CNC router bits. https://www.toolstoday.com/?utm_source=youtube&utm_medium=referral&utm_campaign=maze-game
How do you think this turned out? I used this on the 24x36” STEPCRAFT M.1000 CNC but the plans will work with your setup.
The customizable and downloadable plans for this project are also available on our website item no. MAZ_GAME
https://www.toolstoday.com/maze-game-cnc-plans.html
Feed, Speed & CNC Running Parameters
45771-K Solid Carbide Spektra Extreme Tool Life Coated 30 Degree Engraving 0.005 Tip Width x 1/4 SHK x 2-1/4 Inch Long Signmaking CNC Bit
https://www.toolstoday.com/v-14233-45771-k.html
RPM: 18,000
Feed Rate: 50ipm
Plunge Rate: 25ipm
Chip Load per Tooth: 0.020”
Amana Tool RC-45711 In-Tech Insert Carbide V Groove 90 Deg x 11/16 D x 21/64 CH x 1/4 Inch SHK Single Flute Router Bit
https://www.toolstoday.com/v-10600-rc-45711.html
RPM: 18,000
Feed Rate: 40ipm
Plunge Rate: 20ipm
Chip Load per Tooth: 0.020”
Amana Tool 51441-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/16 D x 1/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit
https://www.toolstoday.com/v-16104-51441-k.html
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Spiral Ramp Down: 0.125”
Amana Tool 51404-K CNC Spektra Coated SC Spiral O Single Flute, Plastic Cutting 1/4 D x 3/4 CH x 1/4 SHK x 2 Inch Long Up-Cut Router Bit
https://www.toolstoday.com/v-13351-51404-k.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Spiral Ramp Down: 0.125”
Amana Tool 46202-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/4 Dia x 3/4 CH x 1/4 SHK 2-1/2 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-13779-46202-k-bit.html
RPM: 18,000
Feed Rate: 100ipm
Plunge Rate: 50ipm
Spiral Ramp Down: 0.250”
Amana Tool 46233-K SC Spektra Extreme Tool Life Coated Spiral Plunge 1/16 Dia x 3/16 CH x 1/4 SHK 2 Inch Long Down-Cut Router Bit
https://www.toolstoday.com/v-14497-46233-k.html
RPM: 18,000
Feed Rate: 35ipm
Plunge Rate: 17.5ipm
Spiral Ramp Down: 0.125”
Amana Tool 49504 Carbide Tipped Corner Rounding 1/4 R x 1 Inch D x 1/2 CH x 1/4 SHK w/ Lower Ball Bearing Router Bit
https://www.toolstoday.com/v-5854-49504.html
I then used the Fein AMM300 MultiMaster multi tool to trim the tabs and then I rounded over and trimmed the tabs using the Amana Tool 49504 1/4" radius roundover bit on the SawStop router table, both available on our website.
Links
** Subscribe - https://www.youtube.com/user/toolstoday
STEPCRAFT M.1000 36 x 48 CNC Machine https://www.toolstoday.com/stepcraft-m-1000-cnc-system.html
FEIN 71293261090 MultiMaster AMM300 Plus Start Set, Cordless Oscillating Multi-Tool
https://www.toolstoday.com/v-16470-71293261090.html
** Shop the website - https://www.toolstoday.com/?utm_source=youtube&utm_medium=referral&utm_campaign=shop-cart
** Like at Facebook - http://tinyurl.com/toolstoday-facebook
** Follow on Instagram - http://instagram.com/toolstoday
More Links
Amana Tool® http://www.amanatool.com