Intro / History of boat
2:00 Cutting the boat in half
3:09 Inspecting the inside of boat / accessing damage
4:39 Repair topside cracks with plastic epoxy
7:04 Fiberglass repair to underside of top half
8:23 Plastic Dip Spray to top side
9:40 Two part pour foam to bottom half
11:04 Resealing the two halves back together
12:28 Edge trim installation / Putting the boat back in the water
JB Weld 2 part plastic epoxy
https://www.amazon.com/gp/aw/d/B003S2E4UE/ref=yo_ii_img?ie=UTF8&psc=1
Fiberglass cloth 50in x 15ft
https://www.amazon.com/gp/aw/d/B07B2D6K72/ref=yo_ii_img?ie=UTF8&psc=1
Fiberglass Resin 0.9 gal with hardener
https://www.amazon.com/gp/aw/d/B003ODJ8JE/ref=yo_ii_img?ie=UTF8&psc=1
Resin spreader / squeegee
https://www.amazon.com/gp/aw/d/B07XCHZBV5/ref=yo_ii_img?ie=UTF8&psc=1
Foam brush 2" 48ct
https://www.amazon.com/gp/aw/d/B01MR5NB5H/ref=yo_ii_img?ie=UTF8&psc=1
2 part pour foam 1 gal each
https://www.amazon.com/gp/aw/d/B089ZWRPS7/ref=yo_ii_img?ie=UTF8&psc=1
1 quart mixing cups
https://www.amazon.com/gp/aw/d/B0023UPORY/ref=yo_ii_img?ie=UTF8&psc=1
Tan Camo paint 6 pk
https://www.amazon.com/gp/aw/d/B00I9SK3BG/ref=yo_ii_img?ie=UTF8&psc=1
Silicon sealant adhesive clear waterproof 3pk
https://www.amazon.com/gp/aw/d/B096BKMTF4/ref=yo_ii_img?ie=UTF8&psc=1
Edge trim black larger 25ft
https://www.amazon.com/gp/aw/d/B00LB0HHBI/ref=yo_ii_img?ie=UTF8&psc=1
In case you are wondering, total cost for this restoration was $390. Just a little over budget but about the same cost to buy a used one.
The same process should apply to all these boats
Pond prowler
Bass Hunter
Sun Dolphin
Quest Angler
Pelican - Bass Raider